GOLD PRINTING INK

Description

Instructions:

For light and medium colored shirts. Hot-split and cold-peel transfers. 100% Cotton fabrics only.
Stencils: Use any direct emulsion or capillary film compatible with plastisol inks.

Additives: If reducing the viscosity of the ink is necessary, add 3-5% Viscosity Reducer (PLRE-9000) by weight. Do not use any additives when using Ultrasoft for plastisol transfer production.
Curing Direct Prints: Ultrasoft inks will fully cure when the entire thickness of the ink deposit reaches 160° C.

Metallic inks are not recommended for transfer applications.
Curing Heat Transfers: Ultrasoft ink will semi-cure or gel when it reaches(150°-160°C).
Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.

Performance:

Coverage: Medium Opacity
After Flash Tack: Decreases with increased mesh

Squeegee:

Profile: Square
Type: Polyurethane
Angle: 10° – 20°

Screen:

Mesh: 86 or lower

Storage:

Storage Temperature: 65°F – 95°F (18°C – 35°C)